Hawk Scientific

13/06/2026

Key Take aways on Preparedness for Ebola in your Lab

Ensuring your lab is prepared is not a one-time event but a continuous process of training, drilling, and validating procedures.
• Start with a Gap Analysis: Compare your current facilities, training, and equipment against the BSL-3 standard and the protocols listed in the PAHO/WHO algorithms .

• Focus on Core Safety: If your lab cannot meet BSL-3 requirements, your entire preparedness plan should center on the safe inactivation of samples at the point of collection or reception before any processing occurs .

• Pursue Specialized Training: Organizations like the National Emerging Special Pathogens Training and Education Center (NETEC) offer specific hands-on training for lab professionals on special pathogens like Ebola . Seek out these resources to ensure your team's skills are sharp.

12/06/2026

Handling Ebola samples

Having a plan on paper is just as important as having the right equipment. Standardized, validated procedures are the backbone of a safe response.
• Validation of Inactivation: If using chemical inactivation, it is critical to validate the procedure. Recent studies have shown that guanidine-based transport media can inactivate high titers of the Ebola virus within 30 minutes at room temperature, but this must be a tested and verified step in your workflow .
• Adhere to Strict Sample Management Protocols: Follow validated procedures for sample collection (e.g., whole blood in EDTA tubes) and storage (samples can be kept at 2–8°C for up to a week, but shipping within 48 hours is best). Never store biological samples under BSL-2 conditions any longer than necessary before shipment . If you need to send a sample to a WHO Collaborating Centre for confirmation, you must contact them for authorization first; do not send samples without prior approval .

11/06/2026

How to Prepare your hospital staff for Ebola

A safe lab is only as good as its staff and the tools they use. Human error is a major risk factor, which can be mitigated through rigorous training and reliable equipment.

• Invest in Competent Personnel: Staff must be extensively trained in EVD-specific protocols, including proper donning (putting on) and doffing (removing) of PPE, which is a high-risk procedure . Regular hands-on drills for spill management and waste handling are essential. Where possible, personnel working in high-risk zones should be vaccinated against Ebola (Ervebo) at least 10 days before starting work .

• Deploy Reliable Diagnostics: A prepared lab needs rapid and accurate diagnostic capabilities. The GeneXpert platform is a widely recommended tool because it is a rapid, closed-system test that can be deployed in field conditions. It has the added benefit of distinguishing between an actual Ebola infection and a recent vaccination .

• Plan for Power and Logistics: Ebola testing cannot afford interruptions. Laboratories require a dependable power supply, typically through multiple backup generators that run continuously, and Uninterruptible Power Supplies (UPS) for sensitive equipment . Remember to plan for the logistics of transporting samples to a reference lab using IATA Category A certified triple packaging (P620) .

09/06/2026

You can also follow on Instagram to see more.

09/06/2026

How do you Prepare your Lab to handle Ebola?

The first step is ensuring your facility's physical infrastructure meets the required standards. Ebola virus is a Risk Group 4 pathogen, and all work must be conducted under the appropriate level of containment.

• Minimum Containment is BSL-3: Diagnostic samples must be handled in a Biosafety Level 3 (BSL-3) laboratory. If the goal is to grow or isolate the virus in culture, BSL-4 containment is mandatory .
• Inactivation as a Strategy: If a BSL-3 lab is not available, there is an alternative. You can safely handle samples in a BSL-2 lab only if the virus is first completely inactivated. This is done using specialized transport media containing guanidine salts, which kill the virus while preserving its genetic material for testing . This approach greatly reduces risk and removes the need for a strict cold chain .
• Facility Design: Field labs are often set up with strictly demarcated "hot," "warm," and "cold" zones to prevent contamination. The "hot zone" is where infectious samples are handled and full PPE is required, while administrative work occurs in the "cold zone"

21/05/2026

Get this Hemoglobin meter absolutely free with purchase of only 40 packs of hemoglobin strips pk/50 @ 3500 each. Suitable for Medical camps

19/05/2026

🔬 Meet Hawk Scientific!

We are a trusted supplier of medical and laboratory equipment and consumables in Kenya.

Whether you run a hospital, diagnostic lab, research institution, or university — we help you get the right equipment at the right price, with reliable after-sales support.

Our catalogue includes:
✅ Lab analysers & instruments
✅ Diagnostic consumables
✅ Safety equipment
✅ Lab glassware & plasticware
✅ Medical devices & supplies

Ready to equip your lab or facility? Send us a message or WhatsApp us today!

📞 [+254778349155] | 📧 [email protected]

18/05/2026

09/01/2025

09/01/2025