Mould Avoidance Consultancy

Call Directions Website Contact the business

Mould Avoidance Consultancy Mould Avoidance Consultancy specialises in expert advice, testing and 1-1 services for CIRS, Immune Compromised and Chronic Illness Sufferers.

12/10/2026

Quick mould prevention hack: Run your ceiling fan on LOW 24/7 to keep air circulating and reduce stagnant air around your home instead of opening the windows.

🌬️ Costs nothing to run, could help prevent mould-prone dead spots, and takes zero effort!

06/10/2026

Weeds growing in your foundation? Does it mean the slab is wet?
Not necessarily. This is residual growth from when groundwater was high.
I moisture-tested the slab and surrounding areas, and it’s completely dry.
Growth doesn’t always mean there’s a current moisture problem.

29/09/2026

Your dehumidifier could be spreading what it’s supposed to remove.

Having used the new NWT dehumidifiers for a while now, I am VERY impressed. So we’ve now added a complete, step-by-step breakdown and deep-clean of the NWT to the course, alongside Ionmax & AusClimate.

Dehumidifiers can harbour mould and microbial growth inside the unit, which is why we show you how to fully break it down, clean it properly, then apply ACX to interrupt the mould growth cycle and help prevent fungal hyphae from developing.

🔥 20% OFF, with ACX + the course (includes all models).

15/09/2026

Have you siliconed THESE spots? đź‘€

If not, grab a bottle and check your bathroom.
Around the bath.
Under the vanity top.
Around the basin.
And especially where water can sneak underneath things.

You’re not just sealing a gap. You’re stopping water from getting into places you can’t see.

Save this one for your next bathroom check. đź‘€

07/09/2026

Finally, a way to treat mouldy car air conditioning.
This has been one of my most asked questions…
“But what do I do about my car?”

Finally, after trialling so many products and avenues for application, I’ve finally (and successfully) found way to treat vehicle air conditioning with ACX!

I’ve put the entire process into a step-by-step course alongside ACX so you can do it yourself.

👉 DM MOULD and I’ll send you the link.

03/09/2026

The new kid on the block đź‘€
Great price point, and it has all the features I look for in a dehumidifier. But time will tell…

I’m applying ACX and putting it to the test, so stay tuned for the update! NWT Australia

20/08/2026

This is why we use ACX on exhaust fans. đź‘€

This bathroom had fans venting into the roof cavity, creating the perfect environment for moisture and mould.
After upgrading the fans and venting them properly outside, we coated the fan barrel, housing and ducting with ACX to help break the mould growth cycle.
As I’ve said before, ACX does NOT kill mould. And we don’t want it to. We remove mould.
When applied correctly, ACX helps interrupt the mould growth cycle, helping prevent mould from continuing to grow.

DM Mould for the link

18/08/2026

If you have ducted air conditioning, check this NOW.
I see ductwork installed incorrectly ALL the time.
❌ Sitting on insulation
❌ Poorly sealed
❌ Held up with string or wire
❌ No airflow around the duct
❌ Condensation + mould as a result

Your ductwork should be properly sealed, insulated and suspended with airflow around it.
This is Ducted Aircon 101… but so many installations get it wrong. 👀
What’s hiding above your ceiling?

11/08/2026

This ad is utter nonsense, but I see similar ones far too often.

“Point and shoot” and the mould disappears?

It doesn’t work like that. Mould doesn’t just disappear because you sprayed something on it.

I honestly can’t believe this stuff is still being advertised.

03/08/2026

Think mouldy flexible ducting can be cleaned? Think again.

Those spinning brushes and whips you see advertised can’t properly clean the ridged inner liner, and they can even damage it.

If flexible ducting is contaminated with mould, replacement is often the better option.

Don’t believe everything you’re sold. 👀


Address

Virginia, NT

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+431282942

Website

Alerts

Be the first to know and let us send you an email when Mould Avoidance Consultancy posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Mould Avoidance Consultancy:

Shortcuts

Share

Category