Enviro Technologies

Directions Website Contact the business

Enviro Technologies Advanced Monitoring. Trusted Results. Enviro Technologies delivers smart, compliant solutions for critical environments across industries.

An aseptic area entry point runs through four steps before a door ever opens.Every one of those steps exists to answer a...
18/09/2026

An aseptic area entry point runs through four steps before a door ever opens.

Every one of those steps exists to answer a single question a Schedule M or 21 CFR Part 211 audit will eventually ask:

Who was actually in this room, and when?

👉 Step 1: BioSLIM verifies identity through fingerprint, card, or PIN, matched against a stored biometric template before the request even reaches the door

👉 Step 2: smartXS NG plus checks that identity against room-specific access rights, so clearance for one aseptic zone doesn't imply clearance for another

👉 Step 3: Man trap logic enforces the two-door airlock at the hardware level, making a simultaneous open structurally impossible, not just against protocol

👉 Step 4: Every entry logs automatically to the audit trail, capturing user ID, timestamp, and door, with tailgating flagged separately through CCTV integration

A system built this way turns entry into evidence, at every single step. It does it without depending on a manual log.

Four steps, one system, nothing left unaccounted for.

Get Enviro Enabled today.

17/09/2026

Here’s to the people who imagine, create and innovate every day to build a smarter tomorrow.

Wishing you a prosperous Vishwakarma Puja!

enviroSCAN and enviroUnisoft cover what a GMP-compliant monitoring system for a pharma QC lab actually needs.Together, t...
16/09/2026

enviroSCAN and enviroUnisoft cover what a GMP-compliant monitoring system for a pharma QC lab actually needs.

Together, they turn a regulatory checklist into a working system, not a set of separate boxes to tick.

enviroSCAN handles the floor. Built-in RH, temperature, and DP sensors log continuously, with Normal, Alert, and Action limits set per channel.

enviroUnisoft handles the record behind it, storing every reading as a tamper-proof, encrypted file and generating MKT, audit trail, and equipment-wise reports on request.

✅Continuous logging, real-time display, and alarms on the floor
✅Audit trail, historical trends, and calibration tracking behind it
✅Controlled access, logged at every login

A checklist only matters if a system can produce every item on it, on demand, without anyone assembling it manually first.

Get every item on the checklist covered. Get Enviro Enabled today.

15/09/2026

Progress begins with a mind that refuses to accept the ordinary.

This Engineers’ Day, we celebrate the people who turn questions into solutions, ideas into innovation, and possibilities into progress.

To every engineer shaping a smarter, stronger world, thank you for thinking it through.

14/09/2026

Ganesh Chaturthi is a time to welcome new beginnings with open arms and an open mind.

Wishing you a festival full of new possibilities, good opportunities, and happy beginnings.

enviroDPMS tracks temperature, humidity, and differential pressure inside a clean room, all the time.If any of the three...
12/09/2026

enviroDPMS tracks temperature, humidity, and differential pressure inside a clean room, all the time.

If any of the three moves out of range, it sends an alert right away - on screen, by email, and by SMS. Every reading is time-stamped and stored, so the record is always ready when someone needs to check it.

The data connects directly into a facility's larger monitoring system too, so nothing sits isolated on one screen.

Microbial growth takes hold when these conditions move out of range, long before it shows up in a batch result.

Catch the problem early with enviroDPMS, before it turns into a bigger one.

Get ahead with the right monitoring solution. Get Enviro Enabled today.

enviroDIS enforces a simple rule across every clean room entry point → only one door in a set opens at a time.In an ase...
11/09/2026

enviroDIS enforces a simple rule across every clean room entry point → only one door in a set opens at a time.

In an aseptic filling area, that rule matters most.

This is the point in a facility with the least tolerance for outside air. A door held open even briefly while product is exposed puts the entire batch at risk.

The logic is set up on site through embedded firmware, no computer required, and it scales across configurations from two doors up to eight. One door releases, the other locks, automatically, every time. The single built-in exception is for emergencies, where holding the switch opens every door at once.

enviroDIS makes that risk structurally impossible, not just discouraged by protocol.

Get ahead of what a broken seal lets in.
Get Enviro Enabled today.

Every reading a facility relies on starts the same way → as a raw signal, at a single point of contact between the envir...
10/09/2026

Every reading a facility relies on starts the same way → as a raw signal, at a single point of contact between the environment and the sensor reading it.

What that sensor is built to do at that point determines what everything downstream can trust:

✅ Sensing technology: enviSENSE uses capacitive sensing for humidity and band gap sensing for temperature, each suited to the physical property it's measuring.

✅ Signal transmission: A loop-powered, two-wire 4-20mA output means the reading feeds straight into a facility's EMS, without an extra converter in between.

✅ Mounting configuration: Wall, duct, or room mount, chosen based on where the parameter actually needs to be measured.

✅ Parameter range: Temperature, humidity, or differential pressure, each available as its own dedicated variant rather than one sensor compromising across all three.

That's what a sensing layer is actually for ➡️ making sure what reaches the record started as an accurate signal in the first place.

Talk to us about your sensor selection for your next monitoring layout.

Get Enviro Enabled today.

One bad reading can cost far more than the batch itself. enviSENSE is designed to make sure that cost never gets a reaso...
09/09/2026

One bad reading can cost far more than the batch itself. enviSENSE is designed to make sure that cost never gets a reason to show up.

It measures temperature and humidity through a band gap sensor and a capacitive humidity sensor, each factory-calibrated for its own parameter, with a reading accuracy within 0.2°C and 2% RH.

The live LCD display shows both values directly on the unit, right where staff need them, inside the clean room itself. Solder pads stay protected against corrosion, and an IP65-rated enclosure holds accuracy steady across a full 0°C to 70°C, 0-100% RH range.

A flameproof variant, housed in die-cast aluminium, extends the same accuracy into hazardous zones.

Precision-built to hold up in every environment it's placed in.

Get ahead with readings you can stand behind.

Get Enviro Enabled today.

04/09/2026

Proof doesn't come just one time. It comes from discipline, repeated without exception, held to the same standard every time.

That consistency is what stands the test of time. It's never just one grand moment that's remembered, it's the unbroken effort behind it.

This Janmashtami, we celebrate that steadiness.

Address

Bhumi World Industrial Park, Building No D-7/Unit No 254, Pimpas
Thane
421302

Opening Hours

Monday 9am - 5:30pm
Tuesday 9am - 5:30pm
Wednesday 9am - 5:30pm
Thursday 9am - 5:30pm
Friday 9am - 5:30pm
Saturday 9am - 5:30pm

Website

Alerts

Be the first to know and let us send you an email when Enviro Technologies posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Enviro Technologies:

Shortcuts

Share