Infant Feeding Labs

Call Directions Website Contact the business

Infant Feeding Labs Infant Feeding Labs is an independent laboratory that tests infant feeding products.

10/02/2026

It is really important to wash bottles & ni***es before use. In this example, I show how sometimes a piece of silicone is leftover after the process of creating bottle ni***es. This would be easily removed with washing, but would probably not be removed by steam sterilization alone. ⁠
⁠
This post is for educational purposes only. This is not an endorsement or recommendation of any product. This post is not sponsored. ⁠
⁠

10/01/2026

If you have multiple flow rates of the Dr. Talbot's ni***es, in this video, I show you how to tell which ni**le is which. ⁠
⁠
The Preemie is labeled (in REALLY small letters) as "XS."⁠
The Slow flow is labeled as "S"⁠
⁠
Flow rate information for the Dr. Talbot's is available on Infant Feeding Labs through the Flow Pro membership: https://infantfeedinglabs.com/professionals
⁠
This post is for educational purposes only. This is not an endorsement or recommendation of any product. This post is not sponsored. ⁠
⁠

09/30/2026

The Dr. Talbot's bottles can be self-sterilized. In this video, I walk you through how to put it all together to sterilize in the microwave. ⁠
⁠
Flow rate information for the Dr. Talbot's is available on Infant Feeding Labs through the Flow Pro membership: https://infantfeedinglabs.com/professionals
⁠
This post is for educational purposes only. This is not an endorsement or recommendation of any product. This post is not sponsored. ⁠
⁠

09/30/2026

The Dr. Talbot's bottles both have a 3 piece venting system, similar to the Dr. Brown's or Munchkin Bond venting systems, but with one extra silicone piece. ⁠
⁠
The ni***es for both of the Dr. Talbot's bottles are most easily inserted into the collar from the top (instead of pulling the ni**le through from the bottom). ⁠
⁠
Flow rate information for the Dr. Talbot's is available on Infant Feeding Labs through the Flow Pro membership: https://infantfeedinglabs.com/professionals
⁠
This post is for educational purposes only. This is not an endorsement or recommendation of any product. This post is not sponsored. ⁠
⁠

09/28/2026

Dr. Talbot's has two product lines - the Silicone bottle and the Anti-colic bottle. The ni***es are very similar, but the Silicone bottle ni***es are a little bit wider at the bottom. ⁠
⁠
Flow rate information for Dr. Talbot's is available on Infant Feeding Labs through the Flow Pro membership: https://infantfeedinglabs.com/professionals

This post is for educational purposes only. This is not an endorsement or recommendation of any product. This post is not sponsored. ⁠
⁠

Flow rate information is available for the PopYum level 1 (slow-flow, 0m+) ni**le on Infant Feeding Labs through the Flo...
09/25/2026

Flow rate information is available for the PopYum level 1 (slow-flow, 0m+) ni**le on Infant Feeding Labs through the Flow Pro membership here: https://infantfeedinglabs.com/professionals
⁠
This post is for educational purposes only. This is not an endorsement or recommendation of any product. This post is not sponsored. ⁠
⁠

Welcome Children's Hospital of Atlanta to the Flow Pro Group membership! ⁠⁠CHOA's team has really gotten on board and ha...
09/25/2026

Welcome Children's Hospital of Atlanta to the Flow Pro Group membership! ⁠
⁠
CHOA's team has really gotten on board and has 28 (and counting!) of their team members signed up through their group membership!⁠
⁠
Would your team like to gain access to the most up-to-date flow rate information? Enroll your team! DM me to learn more!⁠
⁠

09/24/2026

A couple of other helpful tips. ⁠
⁠
1. You really need to screw the collar onto the bottle tightly to avoid leaking. The good news about this is that the vent is not built into the collar, so you can tighten it as much as you need to without worrying about it disrupting the vent. ⁠
⁠
2. Avoid squeezing the two buttons on the side while feeding the baby or else you will sq**rt milk into their mouth. The good news is that little hands who may be exploring the bottle won't be able to do this on their own. And if you accidentally squeeze one side, it doesn't do anything either. Just avoid squeezing both sides at the same time. ⁠
⁠
Flow rate information for the PopYum is available on Infant Feeding Labs through the Flow Pro membership: https://infantfeedinglabs.com/professionals
⁠
This post is for educational purposes only. This is not an endorsement or recommendation of any product. This post is not sponsored. ⁠
⁠

09/23/2026

Inserting & removing the PopYum ni**le from the bottle collar can be a little tricky. I found that the easiest thing to do is to sort of fold it, get it lined up, and then let go to allow it to open back up. Then, give a little tug and make sure it lays flat within the collar and you're good to go. ⁠
⁠
To remove the ni**le, press down on one edge of the ni**le to make it fold, then remove. ⁠
⁠
Flow rate information for the PopYum ni**le can be found on Infant Feeding Labs through the Flow Pro membership here: https://infantfeedinglabs.com/professionals
⁠
This post is for educational purposes only. This is not an endorsement or recommendation of any product. This post is not sponsored. ⁠
⁠

09/22/2026

When you go to purchase replacement ni***es for the PopYum bottle, it can be a little confusing. The ni***es are different than any other kind out there and kind of look like a whole bottle by themselves. ⁠
⁠
Flow rate information for the PopYum is available on Infant Feeding Labs through the Flow Pro membership here: https://infantfeedinglabs.com/professionals
⁠
This post is for educational purposes only. This is not an endorsement or recommendation of any product. This post is not sponsored. ⁠
⁠

Address

One Hollis Street , Suite 215
Wellesley, MA
02482

Telephone

+16179028774

Website

Alerts

Be the first to know and let us send you an email when Infant Feeding Labs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Infant Feeding Labs:

Shortcuts

Share

Category