Treace Medical Concepts, Inc.

Treace Medical Concepts, Inc. Treace Medical brings a 3D approach to anatomic bunion and midfoot correction surgeries. This is a professional channel.

06/02/2026

Speed and Compression of a Staple, Stability of a Titanium Locking Plate.*

*Encompasses a locking plate and screw construct.

SpeedMTP® is engineered for performance — delivering rapid, precise placement, powerful dynamic compression, and an ultra–low profile design to reduce soft tissue without compromising strength or stability.

See before & after X-rays from Dr. Scott Kochenower in Lawton, OK.

*Constructs shown are at the surgeon’s discretion.

Discover how you can optimize your fusion experience with SpeedMTP®. Schedule your demo at Treace.com/SpeedMTP.

Individual results may vary. These results are specific to this patient. Before use of the system, the surgeon must refer to the appropriate instructions for use and surgical technique for complete warnings, precautions, indications, contraindications, safety information, and adverse events. Risks include but are not limited to: infection, discomfort from the presence of the implant, loosening of the implant with loss of correction with nonunion or malunion. If any of these occur, additional treatments may be needed.

Surgeon is a paid consultant of Treace Medical Concepts, Inc.

Celebrating the 500th IntelliGuide® PSI case.Thank you to our surgeon partners for advancing personalization in 3D bunio...
05/28/2026

Celebrating the 500th IntelliGuide® PSI case.

Thank you to our surgeon partners for advancing personalization in 3D bunion and midfoot correction. IntelliGuide® PSI brings patient-specific planning and precision into every step of the procedure, helping surgeons simplify complexity before entering the OR and execute with confidence.

Reach out to your Sales Rep to see how you can start using IntelliGuide® PSI in your practice.

05/27/2026

Every surgeon approaches bunion correction differently. That’s why Treace continues to build a comprehensive portfolio of 3D solutions designed to support a wide range of procedural preferences, deformity severities, and patient needs.

From distally based osteotomies to proximal correction through the TMT joint. Treace solutions give surgeons the flexibility to choose the approach that aligns with their technique and treatment goals.

A portfolio designed to help deliver reproducible 3D correction across the full spectrum of bunion and midfoot deformities.

Before use of the system, the surgeon must refer to the appropriate
instructions for use and surgical technique for complete warnings, precautions, indications, contraindications, safety information, and adverse events. Risks include but are not limited to: infection, discomfort from the presence of the implant, loosening of the implant with loss of correction with nonunion or malunion. If any of these occur, additional treatments may be needed.

For complete instructions for use, surgical technique and full risk and benefit information, visit www.Lapiplasty.com/surgeons/labeling.

Confidence and control in every cut. ​Nanoplasty® 3D MIS Bunion Correction is designed to support a fast, precise osteot...
05/21/2026

Confidence and control in every cut.

​Nanoplasty® 3D MIS Bunion Correction is designed to support a fast, precise osteotomy with a guided saw-cut technique, eliminating the need for a burr. Built for efficiency in the OR, the system helps streamline workflow while delivering the consistency and reproducibility expected from Treace’s 3D solutions.

​Part of a comprehensive portfolio addressing the full spectrum of bunion and midfoot deformities, giving surgeons the flexibility to treat a wide range of cases with confidence.

​Before use of the system, the surgeon must refer to the appropriate instructions for use and surgical technique for complete warnings, precautions, indications, contraindications, safety information, and adverse events. Risks include but are not limited to: infection, discomfort from the presence of the implant, loosening of the implant with loss of correction with nonunion or malunion. If any of these occur, additional treatments may be needed.

​For complete instructions for use, surgical technique and full risk and benefit information, visit www.Lapiplasty.com/surgeons/labeling.

​

MIS without the steep learning curve. Nanoplasty® 3D MIS Bunion Correction™ is the only bunion correction procedure in t...
05/20/2026

MIS without the steep learning curve.

Nanoplasty® 3D MIS Bunion Correction™ is the only bunion correction procedure in the U.S. delivering a predictable, minimally invasive 3D correction through a discreet 1.5 cm incision. It’s guided saw-cut technique allows for quick mastery.

The Nanoplasty® Procedure provides:

✔ 𝗜𝗻𝘀𝘁𝗿𝘂𝗺𝗲𝗻𝘁𝗲𝗱 𝘁𝗼 𝗱𝗶𝗮𝗹 𝗶𝗻 𝘁𝗿𝗶𝗽𝗹𝗮𝗻𝗮𝗿 𝗰𝗼𝗿𝗿𝗲𝗰𝘁𝗶𝗼𝗻: Intuitive instrumentation enables a reproducible and stable hands-free 3D correction.

✔ 𝗖𝗼𝗻𝗳𝗶𝗱𝗲𝗻𝗰𝗲 𝘄𝗶𝘁𝗵 𝗮 𝗴𝘂𝗶𝗱𝗲𝗱 𝘀𝗮𝘄-𝗰𝘂𝘁: MIS-compatible cut guide for a fast and precise osteotomy –without the burr.

✔ 𝗣𝗿𝗲𝗱𝗶𝗰𝘁𝗮𝗯𝗹𝗲 𝘀𝘁𝗿𝗲𝗻𝗴𝘁𝗵 𝗼𝗳 𝗹𝗼𝗰𝗸𝗶𝗻𝗴 𝗳𝗶𝘅𝗮𝘁𝗶𝗼𝗻: Ultra-low profile plating system designed to support early weight bearing* and foot width reduction

📌Streamline your workflow with Nanoplasty®. To learn more about the Nanoplasty® Procedure visit https://www.treace.com/products/nanoplasty/ or connect with a Treace Sales Representative today!

Nanoplasty® is a surgical procedure. Before use of the system, the surgeon must refer to the appropriate instructions for use and surgical technique for complete warnings, precautions, indications, contraindications, safety information, and adverse events. Risks include but are not limited to: infection, discomfort from the presence of the implant, loosening of the implant with loss of correction with nonunion or malunion. If any of these occur, additional treatments may be needed. For complete instructions for use, surgical technique and full risk and benefit information, visit https://www.treace.com/labeling/.

*TMC data on file

05/19/2026

Built for performance where it matters most.

The SpeedMTP® Rapid Compression Implant is engineered to support rapid, precise placement with powerful dynamic compression across the fusion site. Its ultra-low-profile design helps reduce soft tissue irritation while maintaining the strength and stability needed for reliable outcomes.

Designed to enhance efficiency without compromising control in bunion and midfoot procedures.

Before use of the system, the surgeon must refer to the appropriate instructions for use and surgical technique for complete warnings, precautions, indications, contraindications, safety information, and adverse events. Risks include but are not limited to: infection, discomfort from the presence of the implant, loosening of the implant with loss of correction with nonunion or malunion. If any of these occur, additional treatments may be needed.

For complete instructions for use, surgical technique and full risk and benefit information, visit www.Lapiplasty.com/surgeons/labeling.

05/18/2026

Advancing personalization in 3D bunion correction.

IntelliGuide® PSI brings patient-specific planning and precision into every step of the procedure, helping surgeons simplify complexity before entering the OR and execute with confidence.

From intelligent pre-op planning to customized 3D printed cut guides, the system is designed to match each patient’s unique anatomy while supporting a more streamlined surgical workflow.

Fewer steps. Less instrumentation. Greater efficiency across a range of deformity severities.*

The Treace Medical Concepts (TMC) Patient Specific Instrumentation System (PSI) is a surgical instrument intended to assist in pre-operative planning and/or in guiding the marking of bone and/or guide surgical instruments in non-acute, non-joint replacing osteotomies in the foot and ankle. There are risks associated with use of the instrumentation. Surgical risks should be explained to the patient prior to surgery. Risks include infection, pain, and foreign body reaction.

For complete instructions for use, surgical technique and full risk and benefit information, visit www.Lapiplasty.com/surgeons/labeling.

*TMC data on file

05/15/2026

MIS bunion correction without the steep learning curve.

With intuitive instrumentation designed to dial in triplanar correction, Nanoplasty® helps surgeons achieve and maintain reproducible, stable hands-free 3D correction. A guided saw-cut technique that enables quick mastery.

See this before & after result from Jennifer Wool-Cottone, DPM (Rochester, NY). Surgeon is a paid consultant of Treace Medical Concepts, Inc.

Nanoplasty® 3D MIS Bunion Correction™ is a surgical procedure. Individual results may vary. These results are specific to this patient. Before use of the system, the surgeon must refer to the appropriate instructions for use and surgical technique for complete warnings, precautions, indications, contraindications, safety information, and adverse events. Risks include but are not limited to: infection, discomfort from the presence of the implant, loosening of the implant with loss of correction with nonunion or malunion. If any of these occur, additional treatments may be needed. Additional information about risks, warnings, and instructions is available at www.Nanoplasty.com.

05/14/2026

Speed. Compression. Stability.

The SpeedMTP® Rapid Compression Implant combines the speed and compression of a staple with the strength and stability of a titanium locking plate.*

Designed to support streamlined precision with rapid insertion and guided targeting, while delivering dynamic compression and secure fixation for reliable construct performance. An ultra-low-profile design helps minimize soft tissue irritation and palpability.

Built to enhance efficiency without compromising stability in bunion and midfoot procedures.

*Encompasses a locking plate and screw construct.

Before use of the system, the surgeon must refer to the appropriate instructions for use and surgical technique for complete warnings, precautions, indications, contraindications, safety information, and adverse events. Risks include but are not limited to: infection, discomfort from the presence of the implant, loosening of the implant with loss of correction with nonunion or malunion. If any of these occur, additional treatments may be needed.

For complete instructions for use, surgical technique and full risk and benefit information, visit www.Lapiplasty.com/surgeons/labeling.

05/13/2026

MIS bunion correction without the steep learning curve.

With intuitive instrumentation designed to dial in triplanar correction, Nanoplasty® helps surgeons achieve and maintain reproducible, stable hands-free 3D correction. A guided saw-cut technique that enables quick mastery.

See this before & after result from Robert Pica, DPM (Richmond, VA). Surgeon is a paid consultant of Treace Medical Concepts, Inc. Construct shown is at the surgeon’s discretion.

Nanoplasty® 3D MIS Bunion Correction™ is a surgical procedure. Individual results may vary. These results are specific to this patient. Before use of the system, the surgeon must refer to the appropriate instructions for use and surgical technique for complete warnings, precautions, indications, contraindications, safety information, and adverse events. Risks include but are not limited to: infection, discomfort from the presence of the implant, loosening of the implant with loss of correction with nonunion or malunion. If any of these occur, additional treatments may be needed. Additional information about risks, warnings, and instructions is available at www.Nanoplasty.com.

Address

100 Palmetto Park Place
Ponte Vedra, FL
32081

Website

, ,

Alerts

Be the first to know and let us send you an email when Treace Medical Concepts, Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Treace Medical Concepts, Inc.:

Shortcuts

Share

Category