Prosthetic Design

Prosthetic Design Prosthetic Design, Inc. was established in 1991 and continues to advance technology in the prosthesis field. Innovation, Quality, & Customer Service.

08/27/2026

PDI FLEXCON’s are a modular alternative to labor-intensive laminations for patients with flexion contractures. Made of lightweight carbon fiber, the FLEXCON provides angular compensation for hip flexion contractures and the proper offset to achieve TKA alignment while absorbing shock, conserving energy, and normalizing gait.

PDI Carbon Fiber Offset Plates provide clinicians with a lightweight, durable solution for achieving proper component alignment in lower limb prosthetic systems. Each plate displaces a bottom-loaded connection component away from the socket, creating the necessary clearance while maintaining compatibility with the standard European 4-hole pattern.

Training Classes with Samuel: Learn, Apply, Clinicians can earn CE credits through training with Prosthetic Design Inc.....
08/25/2026

Training Classes with Samuel: Learn, Apply, Clinicians can earn CE credits through training with Prosthetic Design Inc.. We offer on-site courses where Samuel trains your team for 3.5 CE credits, or attend training at PDI headquarters for 5.5 CE credits (including 0.5 business credit) with hands-on experience.
This course is ABCOP-approved.

To learn more, call 937-470-6975 or email [email protected]

08/21/2026

A little behind-the-scenes look at the post-printing custom socket process!

Plunger pins are used in prosthetic suspension systems to help secure a prosthetic limb to the residual limb. They work ...
08/19/2026

Plunger pins are used in prosthetic suspension systems to help secure a prosthetic limb to the residual limb. They work with a locking liner system, where a liner with an embedded pin is rolled onto the residual limb, and the pin clicks into a locking mechanism inside the prosthetic socket.

This system provides a secure fit, prevents unwanted movement, and allows for easy donning and doffing of the prosthesis.

Have questions or need pricing? Call us today: 800-459-0177

Throwing it back to epic adventures with Andre Noel & Ritsuko Ishigaki in Japan! 🌏~
08/13/2026

Throwing it back to epic adventures with Andre Noel & Ritsuko Ishigaki in Japan! 🌏
~

A MORE SECURE FIT STARTS WITH THE RIGHT LINER!When perspiration increases, maintaining a secure interface between the pa...
08/11/2026

A MORE SECURE FIT STARTS WITH THE RIGHT LINER!

When perspiration increases, maintaining a secure interface between the patient and liner becomes even more important.

Prosthetic Design offers both off-the-shelf and custom silicone liners, including textured options designed to help maintain a more intimate fit.

Learn more: https://prostheticdesign.com/products/centralfab

Since 2005, the PDI Sq**rt Shape 3D Printer has been a game-changer in additive manufacturing, specializing in lower lim...
08/07/2026

Since 2005, the PDI Sq**rt Shape 3D Printer has been a game-changer in additive manufacturing, specializing in lower limb prosthetics.

Designed for precision and efficiency, it seamlessly produces both large and small prosthetic sockets, ensuring a perfect fit for every patient.

The PDI Sq**rt Shape creates prosthetic sockets that are structurally sound, durable, and lightweight. By incorporating PDI’s proprietary printing material, these sockets are resistant to harsh chemicals and environmental conditions, providing long-lasting performance.

Proven in clinical settings, the Dayton Artificial Limb Clinic (DALC) began fitting patients with PDI-printed sockets in 2009.

The results were clear—patients experienced superior comfort and fit!

PRODUCT SPOTLIGHT: Conventional Fabrication Plate This reusable unit is designed for creating a void in the socket for l...
08/05/2026

PRODUCT SPOTLIGHT: Conventional Fabrication Plate
This reusable unit is designed for creating a void in the socket for locks in thermoplastic applications. 65mm diameter plate has a 2° taper for easy removal.
(4) Cone point set screws allow the user to mark the 4-hole pattern during thermoforming. A thumbscrew allows for easy tool removal after thermoforming.

Available in CFP-57-25 for small locks.

MORE: https://prostheticdesign.com/collections/tooling/products/cfp65-25-conventional-fabrication-plate

We fabricate both transtibial and transfemoral designs with consistent quality and a precise fit.• Our definitive 3D-pri...
08/03/2026

We fabricate both transtibial and transfemoral designs with consistent quality and a precise fit.

• Our definitive 3D-printed sockets are built for long-term use using durable polypropylene polymers. They support vacuum, suction, pin, and lanyard suspension systems—delivering a smooth, reliable fabrication experience every time.

• Send us your CAD file, physical cast, limb scan, or measurements—we’ll take care of everything from modeling to final fabrication.

LEARN MORE: https://prostheticdesign.com/collections/pdi-printers/products/pdi-3d-printed-sockets-central-fab

Address

700 Harco Drive
Englewood, OH
45315

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Prosthetic Design posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Prosthetic Design:

Shortcuts

Share

Category